1. Required Materials

Materials (every material 1 each)

Usage

Raspberry Pi Model B+

main board

Flir Lepton 2.0 Thermal Camera Module

Thermal Camera

Raspberry Pi camera Module V2

Camera

A 5V power supply with a micro USB termination

Power

A SD Card

for saving pictures

A USB keyboard

to control raspberry pi

A mouse

to control raspberry pi

A HDMI cable

for connect monitor

wifi module

to connect internet

Details

  1. A 5V power supply with a micro USB termination.

    • Must be able to source at least 700mA

    • It can be a phone charger, they work well. (Phone chargers work well)

  2. A SD Card:

    • At least 8 GB and up to 32 GB of storage

    • No less than class 4.

  3. An Ethernet cable and a connection to an Internet-connected network.If you want to use WiFi in your Raspberry Pi, you can buy a WiFi connection adapter.

About Lepton camera

Environment Specification

Environment

Specification

Operating Temperature Range

-10° C to 65° C

(-20° C to 75° C with some possible performance degradation)

Maximum Operating Temperature

353.15 K (80 °C)

Storage Temperature

40° C to 80° C

Relative Humidity

95 %

Thermal Shock

Air-to-air across operating temp. extremes (-10° C to 65° C, 65° C to -10° C)

Vibration

Transportation profile, 4.3 grms

Image Characteristic

Intrascene Range : 0 K to >400 K (-273.15°C to > 126.85°C)

Operability : Number of non-defective pixels: >99.0% ( < 1 % defect typical )

Last updated

Was this helpful?